ARGUS Support

Firmware

Argus Rev 87 Beta Firmware (Hamvention 2026)

Download the latest firmware.
Un-zip the file into a folder. No installation is required.
Plug in the Argus Data Logger using a USB-C cable.
The programming script assumes the Argus will be programmed on COM 11. When you plug in your Argus module the computer will assign a COM port. You can either change the assigned COM port on Windows to COM 11 or edit the programming file called “flash” to match your COM port.
Note that if you reassign the COM port to 11 in Windows, you need to unplug the USB cable and plug it back in.
Launch the programming script file named “flash”.
This will erase all EEPROM memory and download the latest firmware.

Firmware Installation Instructions